EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Demand Controller is usually a hugely effective solar controller created for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technologies, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for exceptional solar Vitality harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Twin-Stage Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Comprehensive Digital Protections versus overcharging, over-discharging, quick circuits, and reverse polarity.
Step-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Verify the model selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Demand Controller
Pick out a very well-ventilated, dry spot near to the battery financial institution.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Caution: Constantly stick to correct protection protocols and make sure the method is driven off just before connecting elements.
Phase 1: Join the battery terminals into the demand controller (good to optimistic, adverse to adverse).
Stage two: Link the photo voltaic panel array for the PV enter terminals.
Phase 3: Link the load terminals if employing a direct load link.
Move four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Electric power within the controller by connecting the battery to start with.
Use the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, mild control.
five. Monitoring and Knowledge Logging
The Tracer AN Series supports authentic-time checking utilizing the MT50 distant meter.
Facts might be logged by way of the RS485 interaction port utilizing computer software such as Photo voltaic Station PC.
Distant monitoring is possible With all the EPEVER WiFi module.
6. Troubleshooting Widespread Troubles
Issue one: No Electricity Output
Examine battery voltage and connections.
Verify PV panel voltage More info exceeds battery voltage.
Difficulty two: In excess of-Voltage Safety
Confirm the solar array’s voltage ranking.
Change method parameters if vital.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how assures:
Higher Effectiveness: Decreased Power losses throughout conversion.
Enhanced Trustworthiness: Stable overall performance below variable masses.
For a longer time Battery Lifetime: Reliable and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is definitely an Outstanding option for optimizing solar power era and increasing battery existence. By next the above set up guidebook, users can make sure highest efficiency and technique longevity.